Troubleshooting - Klarstein Controlsync Bedienungsanleitung

EN

TROUBLESHOOTING

The oven may have some abnormal breakdown during working, you can check the fault
list before calling to the after-sell service, maybe some breakdown you can repair by
yourself.
Normal operation
When first using the oven, it may have some situation of peculiar smell and smoking
for some hours; Open the heating pattern to let the oven burn without anything for 1
hour when use the oven for the first time, then close the heating function, waiting for
some time until the oven is cold, open the door and clean the oven.
When oven working, it may have sounds of crisp because of well of metal.
If the heating foods have some moisture, the heating emission hole may blow steam
during the working operation.
The fan will start to work after 15 minutes after oven begin to work. Even if the oven is
closed, fan will continue to work for 35 minutes.
Please preheat before put food in oven when for baking.
For a long cooking, you can turn off the oven before stop the oven and using the
balance heat to finish the cooking.
Malfunction table
Problem
Oven is not
working
Lamp is not
coming on
34
Reason
Interrupt electrical
current
Breaker malfunction
Forgot to push the
timer function
Lamp have
defectiveness
No electrical current
Suggestion
Check your kitchen light or other
appliance if working on
Check if your breaker are working on
Reset the timer function
Change for a new lamp
Check if the oven have electrical current