Alarm Function - Klarstein Controlsync Bedienungsanleitung

to standby status.
• After setting the working time or working temperature, when the oven is started,
the working parameter icon
• Please read the function table to learn more.
Notes
1. The grill function setting time range: 0 minutes to 10 hours.
2. When the grilling time is set to 0 minutes, if the button
the oven will not work and the system will automatically return to the standby state.
3. When the grilling time is set to 0 minutes, if the reservation function setting is
performed at this time, after setting the reservation time, touch the button
oven will not make a reservation, and the system will automatically return to the
standby state.
Enquiry function
1. Under barbecue state, touch
position shows the current time of the system, second icon will flash. Re-touch
button or 10s later automatically return to the barbecue time display.
2. At the end of the reminder time setting, reservation or barbecue state, touch
can query the alarm remaining countdown. Re-touch
automatically return to its original state. You can query the remaining alarm time
and reset the alarm time under standby state, when the alarm countdown time is
less than 1 minute, the clock position shows 0:00.
3. In the reservation status, first touch of the
clock position shows the cooking start time, clock value flashes. Re-touch
or 10s later automatically return to the system time display.

Alarm function

Touch button under standby state to enter to reminder function setting
the clock position hour value will flash, minute value will long lit. The reminder time
setting icon flashes, the reminder time icon
1. Rotate programming switch KB2 to set the hour, at this time the hour value is
always bright, the value setting range is 0-23.
2. Touch button again, minute value flashes, and hour value keeps bright;
3. Rotate programming switch KB2 to set the minute, at this time the value of the
minute is always bright, the setting range is 0-59.
4. When the alarm time is set, you can touch
display shows the system time, the reminder time setting icon
second icon flashes, the
down in seconds. When the time countdown is 00:00, buzzer will sound for 1
minute(1s/time), and the reminder time icon
press any button to stop flashing.
goes out.
button once can query system time, the clock
can query the cooking start time, the
is always on.
for confirmation. At this time, the
is always on, and the reminder time starts to count
is always flashing (1s/time), then
is touched at this time,
, the
button or 10s later
button
,at this time
goes out ,the
EN
27