Product Description And Accessory; Installation - Klarstein 10029462 Handbuch

Product Description and Accessory

1 Control panel
2 Side shelf
3 Oven shelf
4 Oven door
5 Door handle
7 Side shelf left
8 Side shelf right
9 Bake tray
10 Oven shelf
• This appliance should be wired into a 16 A double pole switched fused spur outlet, having 3 mm contact separa-
tion and placed in an easily accessible position adjacent to the appliance. The spur outlet must still be accessible
even when your oven is located in its housing to enable the appliance to be disconnected from the mains supply.
• To connect the oven power cord, loosen and remove the cover on the terminal block, in order to gain access
to the contacts inside. Make the connection, securing the cord in place with the cable clamp provided and
then immediately close the terminal block cover again.
• If you have to change the oven power cord, the earthing (yellow/green) conductor must always be 10 mm
longer than the line conductors.
• Care must be taken to ensure that the temperature of the mains supply cable does not exceed 50°C.
• If the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be
obtained from Spares Department.

Installation

18