Calibration; Operating And Control Guide - bürkert 8045 Bedienungsanleitung

4.1 OPERATING AND CONTROL GUIDE

Display
Selection of
parameters
and incrementation of digits
Selection of parameters
and digits
Keys
0......9
ENTER
0......9
+
0......9
+
for 2 seconds
ENTER
+
for 5 seconds
ENTER
0......9
+ +
for 5 seconds
* Only available within the main menu.
ENTER
The Key can be locked to avoid accidental or unauthorized access.
For further information see sections 3.4.1 & 3.4.3.

CALIBRATION

Menu Mode
Previous Menu
Next menu
Activate the menu displayed (If "END" is
displayed, save the modified parameters and
return to the main menu).
Resetting of the daily totalizer* (only available
within daily totalizer option)
Access or return to the CALIBRATION MENU
Access or return to the TEST MENU*
18
Selection and confirmation.
Indication of the state of relays
1 and 2.
(LED on = closed contact)
Finding a value
Increase from the blinking digit
Advance to the next digit
Validate the displayed value
Switching the decimal point:
when entering the K factor or a
volume, in pulse mode
8045