Main Menu - bürkert 8045 Bedienungsanleitung

4.3 MAIN MENU

The following information is displayed within the Main Menu:
12,6 L/S
16,45 mA
0......9
80529 L
6247 L .
CALIBRATION
Flow rate: This is displayed in the selected engineering units
(see calibration menu).
Output signal : The output signal is 4-20mA and is proportional
to the flow according to the selected measuring range.
Main Totalizer: This is displayed in the required engineering
units (see calibration menu). To reset this totalizer see section
4.4.8 in the next menu.
Daily Totalizer: This is displayed with the same engineering
units as the main totalizer. A point behind the unit differentiates
this totalizer from the main totalizer. To reset this value, simulta-
neously press keys
0......9
20
for 2 seconds within this menu.
8045