Calibration Menu - bürkert 8045 Bedienungsanleitung

4.4

CALIBRATION MENU

ENTER
PRESS
The internal Switch2 must be set in the unlocked position to enter parmeters within this
menu. (§ 3.4.1)
The following parameters can be set within this menu:
LANGUAGE LANGUAGE
LANGUAGE LANGUAGE LANGUAGE
K-FACTOR K-FACTOR K-FACTOR
K-FACTOR K-FACTOR
CURRENT CURRENT CURRENT CURRENT CURRENT
PULSE PULSE PULSE
PULSE PULSE
0......9
RELAY RELAY
RELAY RELAY RELAY
FILTER FILTER
FILTER FILTER FILTER
TOTAL TOTAL TOTAL
TOTAL TOTAL
FREQUENC FREQUENC
FREQUENC FREQUENC FREQUENC
The following sections explain how to change the parameter values within the calibration
menu above.
8045
CALIBRATION
SIMULTANEOUSLY FOR 5 SECONDS
Selection between English, German,
French, Italian and Spanish.
Selection of engineering units to display
UNIT UNIT UNIT
UNIT UNIT
flowrate and totalizer.
Calculation of the process K-factor.
Determination of 4-20 mA measuring
range.
Parameter definition of pulse output (unit
and volume).
Parameter definition of relays. This
message only appears if the relay option
has been installed.
Damping selection. There are 10 steps
available and 2 filtering modes.
Totalizer resetting.
Selection of the mains AC frequency (50
or 60 Hz).
Return to operation mode and storage of
END END END
END END
new parameters.
21
SECTIONS
4.4.1
4.4.2
4.4.3
4.4.4
4.4.5
4.4.6
4.4.7
4.4.8
4.4.9