Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IsoGel AIR™ - Model 2860
Stryker IsoGel AIR™ Disinfecting Instructions
Always follow hospital protocol for cleaning
mattresses.
WARNING
• To avoid the risk of patient injury, disinfect the support
surface between patients . Failure to do so could result
in cross-contamination and infection .
• Some disinfectants may cause damage to the product
if used improperly . If the products described below are
used to disinfect the support surface, measures must
be taken to ensure the entire surface is wiped with a
damp cloth soaked in clean water and thoroughly dried
following disinfection . The cover can be damaged when
exposed to such disinfectants beyond the manufacturers'
recommendations . Failure to follow these directions
when using these types of disinfectants may void this
product warranty .
• To avoid the risk of shock, unplug unit prior to cleaning
or disinfecting .
• To avoid the risk of equipment damage, the support
surface cover must be completely dry before storage
or adding linens . Failure to remove excess disinfectant
could cause degradation of the cover material .
Suggested Disinfectants:
- Phenolic Disinfectant
- Chlorinated Bleach Solution (5 .25% bleach diluted 1 part
bleach to 100 parts water)
- 70% Isopropyl Alcohol
1 .
Ensure surface has been thoroughly cleaned and dried
prior to applying disinfectants .
2 .
Wipe down the support surface with a clean, dry cloth to
remove any excess liquid or disinfectant .
3 .
Care must be taken to thoroughly rinse and dry covers
following disinfection .
CAUTION
• Frequent or prolonged exposure to higher concentration
disinfectant solutions may prematurely age the cover
fabric .
• The use of quaternaries containing glycol ethers and/or
accelerated hydrogen peroxides may damage the cover .
Manual Part Number: 2860-009-005 Rev B
Refer to the Operations manual for further operational information.
3
1
2
Micro Climate Management
Werbung
