Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Stryker IsoGel AIR™ Cleaning Instructions
Always follow hospital protocol for cleaning
mattresses.
WARNING
• To avoid the risk of equipment damage, do not immerse
support surface in cleaning or disinfectant solutions . Do
not allow liquid to pool on the support surface .
• Do not iron, dry-clean, or tumble dry the support surface
cover, as this will cause malfunction and damage to the
product .
• Do not stick needles in to a medical bed mattress through
the mattress cover . Holes will allow body fluids from en-
tering the inside (inner core) of the mattress and could
cause cross-contamination .
• To avoid the risk of shock, unplug unit prior to cleaning
or disinfecting .
• To avoid the risk of patient injury, covers (top and
bottom) should be inspected for tears, punctures,
excessive wear, and misaligned zippers each time the
covers are cleaned . If a support surface cover becomes
compromised, the support surface should be removed
from service immediately and replaced to prevent
cross-contamination .
Stryker support surfaces are designed for long-lasting
comfort and reliability . The life of the support surface can
be adversely affected by an increase in frequency of usage
which might include more frequent cleaning and disinfection .
1 .
Using a clean, soft, damp cloth, wipe down the entire
support surface with a mild soap and water solution to
remove foreign material .
2 .
Wipe down the support surface with a clean, dry cloth to
remove any excess liquid or cleaning agent .
3 .
Care must be taken to thoroughly rinse and dry covers
following cleaning .
4 .
Disinfect as necessary with a hospital grade disinfectant
AFTER cleaning has been completed . Refer to
"Disinfecting Support Surface" on
CAUTION
To avoid the risk of equipment damage, when cleaning the
underside of the support surface, ensure that no liquid is
allowed to seep into the zipper area and watershed cover
barrier; fluids allowed to come in contact with the zipper may
leak into the support surface .
Manual Part Number: 2860-009-005 Rev B
Refer to the Operations manual for further operational information.
IsoGel AIR™ - Model 2860
page 1-15 .
3
1
2
Micro Climate Management
Werbung
