High Temperatures-Risks Of Burns; Moving Parts-Risks Of Injuries - Gastroback Design Bread Maker Advanced Bedienungsanleitung

operation is possible.
• Do not use any desk top multi socket outlet, external timer, extension
cord, or remote control systems.
• Always handle power cords with care. The pins of the power plug
must be smooth and clean. Always completely unwind the power cord
before use. Do not place the appliance on a power cord. Power cords
may never be knotted, twisted, pulled, strained or squeezed. Do not
let the plug or power cord hang over the edge of the table or counter.
The power cord may not touch hot surfaces or sharp edges. Ensure
that no one will pull the appliance by the power cord. Take care not
to entangle in the power cord. Always grasp the plug to disconnect
the power cord. Do not touch the appliance or power plug with wet
hands when the appliance is connected to the power supply.
• DO NOT drip or spill any liquids on or in the housing, or oven com-
partment, or power cord. Always ensure that the exterior of the bread
pan is clean and dry before placing the bread pan in the heating
compartment. Otherwise liquid could run into the housing or on the
heating element, causing risk of electric shock or fire. Do not immerse
the appliance or power cord in water or other liquids. Do not pour or
spill any liquids on/in the housing or power cord. Do not place the
appliance on wet surfaces. When liquids overflowed or are spilled on
the housing, heating element, or power cord, immediately unplug the
appliance. Thereafter, clean the appliance and, leaving the lid open,
let it dry for at least 1 day. See: "Care and Cleaning".
the appliance in an automatic dishwasher.
HIGH TEMPERATURES – RISK OF BURNS
• The »Design Bread Maker Advanced« is designed for baking bread
and cakes and making jam in a household environment. For this pur-
pose, the appliance is heated electrically. Thus, improper handling
could cause severe injuries and damage. Please keep this in mind to
avoid scalds and damage.
• Except for the containing food, the lid, bread pan, and exterior of the
appliance can get very hot during operation and thereafter. Additio-
10
nally, hot steam could escape from the ventilation slits in the lid.
• Do not touch the hot surfaces with any parts or your body or any
heat-sensitive or moisture-sensitive objects during operation or while
the appliance is still hot. Only touch the appliance and its parts at
the handles and operating elements during operation and thereafter.
Always protect your hands with oven gloves, when taking out the
bread pan after operation. Beware of hot steam and condensate,
when opening the lid.
• Do not move the appliance when still hot. Always leave the appliance
cool down before moving or cleaning the appliance. Do not place the
appliance or any part of it (e.g. bread pan) on heat-sensitive surfaces,
when hot. Special caution must be used, when moving the bread pan,
while it is containing hot liquids. Ensure to hold the bread pan level
when it is filled with any hot, runny contents (e.g. jam) to avoid severe
scalds and damage.
• You should keep the lid closed during operation. However, even with
the lid properly closed, steam could escape from under the lid during
operation and thereafter. This holds especially for the ventilation slits
in the lid. Do not hold any parts of your body or any delicate objects
over the appliance during operation. Condensate could accumulate
under the lid and drip, when opening the lid. Beware of hot steam
and condensate when opening the lid.
•
DO NOT cook any high-proof alcoholic liquid or alcoholic foodstuffs
Do not clean
(e.g. mulled wine, grog) within the appliance. Do not pour any alco-
holic liquid on/in the appliance to avoid risk of explosion and fire.
MOVING PARTS – RISKS OF INJURIES
Always unplug the appliance when not in use and before removing the
bread pan or ice bucket to avoid injuries due to the kneading works. Do
not insert your hands, hair, clothes or any other objects (e.g. cooking
utensils) into the bread pan or heating compartment with the appliance
connected to the power supply. Always ensure that the bread pan or ice
bucket is properly locked to the coupling of the kneading works, before-
connecting the appliance to the power supply.
11