Functions Of The Buttons; Programs Of The Bread Maker - Gastroback Design Bread Maker Advanced Bedienungsanleitung

FUNCTIONS OF THE BUTTONS

Each time you touch a button, a signal sounds. The buttons need only to be touched
slightly.
Use the buttons of the »Design Bread Maker Advanced« to operate the following
functions:
Button Function
MENU Selection of the desired program (default: 1). The program number is shown on top of the LCD screen.
A list of the available programs is printed on the left side of the lid. Each time this button is touched,
the appliance will switch to the next program number while sounding a beep. The appliance will cycle
through the programs. After number 17, it will return to number 1 again.
START This START/STOP button starts the selected program or pauses / cancels the currently running program
PAUSE or the warming function.
STOP For cancelling a program, keep your finger on the button until a signal sounds (approx. 3 seconds).
NOTE: When cancelling a program, all settings are deleted. There is no way to continue the recently
used program. Thus, only touch this button shortly, if you wish to pause operation and add further
ingredients. Alternatively, unplug the appliance for no longer than 10 minutes.
BURNING Selecting the desired colour of your bread: light, medium, or dark. Default: medium.
COLOR Your choice is indicated via an icon on the bottom of the LCD screen.
This setting is available for the programs 1-9.
WEIGHT Use for setting the total amount of ingredients. Your choice is indicated on top of the LCD screen. The
following settings are available:
• 1000 g—for a total amount of up to 1000 g (1 kg).
• 750 g—for a total amount of all ingredients between 500 g and 750 g (Default).
• 500 g—for a total amount of all ingredients up to 500 g.
Tip: With an amount not sufficient for the total amount of ingredients selected, your bread may not be
done completely or too dry and dark. If it is not done, you can use the program Bake (16) for additio-
nal baking. See: "Applying Some Additional Baking Time".
This button is active only for the programs 1-9.
18
Button Function
+TIME Use these buttons to set up the time duration until completion.
and • With the programs 1-9, 12, 14, and 17 you can set a delayed start of the selected program. In this
-TIME case, the hourglass will flash on the LCD screen. The set time will include the processing time of
the selected program. See: "Using the Timer"
• With the programs 11, 13, 15, and 16, you enter the processing time. In this case, the time flashes
on the LCD screen. You must confirm your time setting via the START/STOP button, before making
other settings or starting the program.
• With program 10 (Jam), time setting is not available and these buttons are inactive.
In all cases, you select the time until your food is finished. Thus, the minimum and maximum time
duration depends on the currently selected program.
To use this function, first select the desired program (MENU) and, if applicable, the WEIGHT and
degree of browning (BURNING COLOR). Then adjust the time.
Tip: With your finger kept on the button, the time setting will run automatically until you remove
your finger.
BAKE This button will directly call the baking program 16. Simply touch this button an thereafter the START/
STOP button for selecting and starting program 16.
IMPORTANT: Timer operation is not available with the Bake program 16. Instead, you may change the
baking time via the +TIME and -- TIME buttons. Default: 30 minutes.
MIX This button is the direct way for selecting program 12 (Mix). Simply touch this button and the START/
STOP button for selecting and starting program 12.
SETTINGS Selects the Homemade program (17).
With the Homemade program selected, this button switches through the various program phases of the
Bread Maker to enable the input of your own program. The current phase and number is shown on the
LCD screen. Use the +TIME and -TIME buttons to program the desired time duration for each phase.
See: "Programming Your Own Settings"
For additional information on the individual program phases, see "Program Phases" and "Programming
Your Own Settings".

PROGRAMS OF THE BREAD MAKER

You select the desired program by touching the MENU button. The corresponding
program number is shown on the LCD screen. The processing time depends on the
selected program. See: "Program Phases".
Nr. Function To Use For ...
1 Basic bread For white and mixed breads mainly consisting of fine wheat and rye flour. The bread has
a compact consistency. You can adjust the browning via the BURNING COLOR button.
19