Important Safeguards For Electrical Appliances - Gastroback Design Bread Maker Advanced Bedienungsanleitung

and clean, and where young children cannot reach it. Do not leave
the appliance or any part of it unattended, when in reach of young
children.
• Do not place the appliance or any part of it in a range, or on or near
hot surfaces (e.g. burner, heater or oven). Do not use the appliance
or any parts of the appliance with any other device or for any other
purpose (e.g. drying of foodstuffs or other materials). Exclusively use
the appliance for processing food that is fit for consumption. Do not
dry or store any food or foreign objects within the appliance. Before
operation, always ensure that the appliance is assembled and con-
nected completely and correctly according to the instructions in this
booklet. Do not handle the appliance or any part of it with violence.
The ventilation slits in the housing must always be unobstructed.
•
The ice bucket, gear box, and stirring paddle may never be heated or
touch hot surfaces (e.g. oven, burner, range) to avoid risk of burst,
melting and distortion. Do not use the ice bucket, gear box, and stir-
ring paddle with any program of the appliance other than the Ice
Cream program! Do not bring the ice bucket in contact with hot sur-
faces or hot liquids. The coolant within the ice bucket would expand
forcefully when heated, thus bursting the ice bucket and causing risk
of severe injuries and damage. After cooling the ice bucket in the
freezer, always protect your hands with gloves before touching the
ice bucket. NEVER touch the ice bucket with wet skin, when it has
been cooled in the freezer. Otherwise, your skin would immediately
freeze solid to the ice bucket, causing severe frost-bites and injuries.
• Do not hold your hands or any foreign objects (e.g. clothes, cooking
utensils) in the heating compartment or bread pan, with the appliance
connected to the power supply. Do not use any hard, sharp or edged
objects (e.g. knives, forks, metal scraper) with the appliance or any
part of it.
•
Do not fill in more dough than 1000 g in total. Otherwise ingredients
or dough may run out of the bread pan and reach the hot heating ele-
ments, causing overheating, fire and/or electric shock.
exterior of the bread pan is completely clean and dry before placing
it in the heating compartment. Always wipe off spilled liquids imme-
diately. If liquids have run out or are spilled on the housing, immedi-
ately unplug the appliance and clean the appliance (see: "Care and
8
Cleaning").
• Always unplug the appliance, and wait until the motor comes to a
standstill, before assembling or disassembling any parts (e.g. bread
pan). Additionally leave the appliance cool down, before moving, or
cleaning the appliance. Always unplug the appliance, when not in
use. Always hold the housing at both sides near the bottom for moving
the appliance. Do not hold the appliance at the lid, lid handle, bread
pan handle, or power cord for moving the appliance. Do not place
any hard and/or heavy foreign objects on or in the appliance or any
part of it.
• Do not use any corrosive chemicals, abrasive cleaners, or cleaning
pads (e.g. bleach, oven cleaner, metal scouring pads) for cleaning to
avoid damage to the surfaces.
•
Do not place the appliance, or any part of it, or power cord in an
automatic dishwasher.
• Do not leave any food dry on the appliance. Always clean the appli-
ance after each use to prevent accumulation of baked-on foods (see
"Care and Cleaning"). Always keep the appliance and its parts,
where it is clean.

IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES

The appliance is heated electrically. Place the appliance near a suitable
wall power socket to connect the appliance directly to a protected mains
power supply with protective conductor (earth/ground) connected proper-
ly. Ensure that the voltage rating of your mains power supply corresponds
to the voltage requirements of the appliance (220 -240 V, 50/60 Hz,
AC, rated for at least 10 A) to avoid interference with other appliances.
The installation of a residual current operated circuit breaker (r.c.c.b.)
with a maximum rated residual operating current of 30 mA in the supp-
lying electrical circuit is strongly recommended. If in doubt, contact your
electrician for further information.
Ensure that the
In various foreign countries, the specifications for power supplies are sub-
ject to incompatible norms. Therefore it is possible that power supplies in
foreign countries do not meet the requirements for safe operation of the
appliance. Thus, before operating the appliance abroad, ensure that safe
9