Getting Started; Initial Setup; Power Up - NeurOptics NPi-300 Pupillometer Gebrauchsanweisung

Getting Started

Unpacking the NPi-300 Pupillometer System
The NeurOptics NPi-300 Pupillometer System is packaged with the
following components (Ex. 1):
• NPi-300 Pupillometer (A)
• NPi-300 Charging Station (B)
• NPi-300 Power Adapter and Plug (C)
• NPi-300 Pupillometer Quick Start Guide
Initial Set-Up
• To set up the NPi-300 for first-time use, please refer to the Power Up section below, ensuring the
NPi-300 is fully charged and Date/Time are set accurately prior to use.

Power Up

Charging the NPi-300 Pupillometer
• Connect the NPi-300 Power Adapter to the NPi-300 Charging Station and
plug into a power outlet. The indicator light at the base of the Charging
Station will display a white color to indicate power has been established to
the Charging Station (Ex. 2).
• Place the NPi-300 into the Charging Station. The
Charging Station indicator light will turn
and the LCD screen will display
icon, indicating the NPi-300 is charging. The indicator
green
light will turn
amber/orange
• An indicator light on the Charging Station indicates a
charging malfunction, and the NPi-300 will not charge (Ex. 5). If this issue
persists, please contact NeurOptics Customer Service.
Indicator Light Color
White
Blue
Green
Amber/Orange
The NPi-300 Pupillometer goes to sleep in the Charging Station to efficiently charge:
• The NPi-300 will initially turn ON (or remain on) upon being placed in the Charging Station.
• After 5 minutes in the Charging Station, the NPi-300 will go to sleep to efficiently charge. The
screen will go dark (Ex. 6). If any button is pressed or the screen is touched within this 5-minute
window, the time period before the NPi-300 goes to sleep is extended by an additional 5 minutes.
• To use the NPi-300 after it has gone to sleep in the Charging Station, simply remove from the
Charging Station, and it will wake up automatically.
• If the NPi-300 does not turn on upon being placed in the Charging Station, the battery level may
be too low for normal usage. The Charging Station indicator light should display a
indicating the NPi-300 is charging. Leave the NPi-300 in the Charging Station until it powers on.
NeurOptics® NPi®-300 Pupillometer System—Instructions for Use ©2021 NeurOptics, Inc.
blue
within the battery
when fully charged (Ex. 4).
Meaning
Charging Station is plugged into a power outlet, and power has been
established. NPi-300 is out of Charging Station.
NPi-300 is placed in Charging Station and successfully charging.
NPi-300 is fully charged.
Charging Malfunction – NPi-300 is not charging. If issue persists,
please contact NeurOptics Customer Service.
For technical support or if you have a question about your For technical support or if you have a question about your
order, please contact NeurOptics Customer Service: order, please contact NeurOptics Customer Service:
p: 949.250.9792 | Toll Free North America 866.99.PUPIL
p: 949.250.9792 | Toll Free North America 866.99.PUPIL
or email us at info@NeurOptics.com
or email us at info@NeurOptics.com
(Ex. 3),
Thank you for the opportunity to
Thank you for the opportunity to
serve your pupillometry needs with
serve your pupillometry needs with
the new NPi -300 Pupillometer
®
the new NPi ® -300 Pupillometer
For additional information regarding our product, please refer to
For additional information regarding our product, please refer to
the Instructions For Use, which can be found at NeurOptics.com
the Instructions For Use, which can be found at NeurOptics.com
Product Description: Product Description: NPi NPi ® -300 Pupillometer -300 Pupillometer ® Model No. Model No. NPi NPi -300-SYS ® -300-SYS ®
A
MKG-0001-00 Rev B (HOMA-BN8P37)
MKG-0001-00 Rev C (HOMA-BN8P37)
C
B
Ex. 3
blue
color,
Ex. 1
Ex. 2
Ex. 4
Ex. 5
Ex. 6
4