Technical Specifications - NeurOptics NPi-300 Pupillometer Gebrauchsanweisung

Appendix B – Technical Specifications
Parameter
Pupillometer Measurement
Detection Threshold
Size Accuracy
Degree of protection
against electric shock
Classification of the equipment
against ingress of liquids
Degree of safety of application
in the presence of flammable
anesthetic mixture with air or
with oxygen or nitrous oxide
Mode of Operation
Power Adapter
Battery
Operating Environment
Transportation and
storage environment
Dimensions
Weight
Classification
Appendix C – Radio Frequency Identification Device (RFID)
Broadcast Range
Broadcast Function
RFID memory card in SmartGuard to/from
NPi-300 Pupillometer
RFID memory card in SmartGuard to/from
SmartGuard Reader
NeurOptics® NPi®-300 Pupillometer System—Instructions for Use ©2021 NeurOptics, Inc.
Description
Pupil diameter (minimum) 0.80 mm
Pupil diameter (maximum) 10.00 mm
Change in Size
+/- 0.03 mm (30 microns)
Pupillometer SmartGuard-Type BF Applied Part provided protection
Ordinary equipment
The equipment is not an AP or APG category equipment
On Demand battery operation
Input: 100-240 VAC +/- 8%
Output: 6V, 2.8 Amps
RF Wireless Charging Output: 5 W, Qi Compliant
3.6 V 11.70 Wh 3350 mAh/hour Li: Ion Cell
Temperature Range: 0° C (32° F) to 45° C (113° F)
Relative Humidity: Non-condensing at all times.
Temperature Range: -38° C (-36.4° F) to 70° C (158° F)
Relative Humidity: Non-condensing at all times.
With SmartGuard = 7.5" H, 3.5" W, 4.5" D
Without SmartGuard = 7.5" H, 3.5" W, 3.5" D
344 grams +/- 10 grams
Class 1 LED product per IEC 62471
Range
Up to 2 centimeters
Up to 2 centimeters
0.03 mm (30 microns)
Frequency
13.56 MHz
13.56 MHz
14