Npi-300 Pupillometer Navigation Guide; Settings - NeurOptics NPi-300 Pupillometer Gebrauchsanweisung

NPi-300 Pupillometer Navigation Guide

Returning to the Home Screen
Press the RIGHT or LEFT buttons (green circles) to return to the Home
Screen (Ex. 36).

Settings

Using the touchscreen or keypad, select
Settings icon icon (Ex. 37) from the
Home Screen to navigate to the Settings
Menu (Ex. 38).
Date and Time
See Setting Date and Time section on
Page 5.
Delete Records
To delete records off of the device memory of the NPi-300 (does not
disable or delete records off of the attached SmartGuard), navigate to the
Settings Menu and press Delete
record (Ex. 39). Records on the device can be deleted for a specific Patient
ID or All Records.
Disabling SmartGuard
The SmartGuard is designed for single patient use. To assist facility
compliance with HIPAA guidelines, the patient data stored on each
SmartGuard can be disabled once pupil exams are no longer required.
To permanently disable the patient data on the SmartGuard, in the
Settings Menu press Disable
disable SmartGuard data (Ex. 40).
Adjusting Default Results Page
The NPi-300 Pupillometer is defaulted to open "Results Page 1," displaying
NPi and Size measurements, following the completion of the Bilateral Pupil
Measurement. To set the default to Results Page 2, displaying additional
Pupillary Measurement Parameters, select the Results Page 1 icon
to toggle to the Results Page 2 icon
LCD Screen Brightness
The NPi-300 is defaulted to maximum brightness of the LCD Screen.
Adjust to medium brightness by pressing
pressing . To return to maximum brightness, simply press the
more time.
Test LED
Pressing the Test icon
is emitted from the NPi-300 when taking a pupil measurement. This
test is for demonstration purposes only and does not affect usage of
the device.
NeurOptics® NPi®-300 Pupillometer System—Instructions for Use ©2021 NeurOptics, Inc.
then select Yes to proceed to delete
and select Yes to proceed to irreversibly
(Ex. 42).
. Adjust to low brightness by
demonstrates a sample of the LED light that
Ex. 37
(Ex. 41)
one
Ex. 36
Ex. 38
Ex. 39
Ex. 40
Ex. 41
Ex. 42
10