allen Advance Table Bedienungsanleitung Seite 56

SPECIFICATIONS
Guidance and Manufacturer's Declaration—Electromagnetic Immunity
The A-71100-XX/ A-71101-XX are intended for use in the electromagnetic environment
specified below. The customer or the user of the A-71100-XX/A-71101-XX should make
sure it is used in such an environment.
Immunity Test
Surge
IEC 61000-4-5
Voltage dips, short
interruptions and
voltage variations on
power supply input
lines
IEC 61000-4-11
Power Frequency
(50/60Hz) Magnetic
Field
IEC 61000-4-8
Note: U is the AC mains voltage prior to application of the test level.
T
56 Allen® Advance Table User Manual (80028190)
IEC 60601
Test Level
± 1 kV (line – line)
± 2 kV (line – earth)
< 5% U
T
(> 95% dip in U )
T
for 0.5 cycles
40% U
T
(60% dip in U ) for
T
5 cycles
70% U
T
(30% dip in U ) for
T
25 cycles
< 5% U
T
( > 95% dip in U )
T
for 5 seconds
3 A/m
Compliance
Level
± 1 kV (line – line)
± 2 kV (line –
earth)
< 5% U
T
(> 95% dip in U )
T
for 0.5 cycles
40% U
T
(60% dip in U ) for
T
5 cycles
70% U
T
(30% dip in U ) for
T
25 cycles
< 5% U
T
( > 95% dip in U )
T
for 5 seconds
3 A/m
Electromagnetic
Environment—
Guidance
Mains power quality
should be that of a
typical commercial or
hospital environment.
Mains power quality
should be that of a
typical commercial or
hospital environment. If
the user of the
A-71100-XX/
A-71101-XX requires
continued operation
during power mains
interruption, it is
recommended that the
A-71100-XX/
A-71101-XX be
powered from an
uninterruptedly power
supply or a battery.
Power frequency
magnetic fields should
be at levels
characteristic of a
typical location in a
typical commercial or
hospital environment.