allen Advance Table Bedienungsanleitung Seite 34

Instructions for Use
The brakes are locked (the locked indicator on the
Allen Advance Table display is green).
The patient is fully prepared for the adjustment.
The Allen Advance Table is in the correct position
for you to install a second support top:
The columns are at the same height.
The Allen Advance Table and the installed support top are level (see
"LEVEL THE ALLEN ADVANCE TABLE AND THE SUPPORT TOP"
on page 32).
The Allen Advance Table is free of objects that could interfere with
adjustment.
All loose or unsupported objects have been secured.
The rail top has the prone supports installed. (if applicable). If it
does not, install them (see page 26).
–
Install the second support top as follows:
a. At one end of the Allen Advance
Table, put the upper H-bracket in
position on the bowtie. Hold the
H-bracket so that the open end is
down, the J ends are towards you,
and the bracket is angled towards
you.
2. Attach the J ends of the H-bracket to
the bowtie bracket so that the H-
bracket fits into the notches on the
sides of the bowtie bracket.
34 Allen® Advance Table User Manual (80028190)