Tilt The Support Top - allen Advance Table Bedienungsanleitung

interfere with adjustment. Otherwise, patient fall, injury, or equipment
damage could occur.
1. Make sure that—
The brakes are locked (the locked indicator on the
Allen Advance Table display is green).
The patient is secured to the support top and is fully prepared for
the adjustment.
NOTE:
We recommend that you use the two large safety straps to secure the
patient to the support top.
The Allen Advance Table is free of objects that could interfere
with adjustment.
WARNING:
Observe lines closely during articulations. Always use go od line
management techniques. Otherwise, patient fall, injury, or equipment
damage could occur.
–
Press and hold the applicable
Trendelenburg or Reverse
Trendelenburg control until the
support top is at the correct angle.
–
To return to the horizontal position, press and hold the
opposite Trendelenburg control until the lowered column is at
the same height as the raised column.
NOTE:
Near the bottom on the outside of the
columns, there are numbers to help identify
the height level.

TILT THE SUPPORT TOP

NOTE:
For bariatric patients, we recommend that you install three supine
access tops (A-70404) to help support the patient during the tilt
procedure.
WARNING:
Before you adjust the Allen Advance Table or use the tilt feature, make sure
that the brakes are locked, the patient is secured to the support top and is
fully prepared for the movement, and the Allen Advance Table is free of
Allen® Advance Table User Manual (80028190)
Instructions for Use
31