Rotate The Support Top 180 - allen Advance Table Bedienungsanleitung

objects that could interfere with the adjustment. Otherwise, patient fall,
injury, or equipment damage could occur.
1. Before you adjust the Allen Advance Table, make sure
that—
The brakes are locked (the locked indicator on
the Allen Advance Table display is green).
The patient is secured to the support top and is fully prepared for
the adjustment.
NOTE:
We recommend that you use the two large safety straps to secure the
patient to the support top.
The Allen Advance Table is free of objects that could interfere
with adjustment.
–
If the Allen Advance Table is in a Trendelenburg position,
press and hold the opposite Trendelenburg control until the
lowered column is at the same height as the raised column and
the tilt level indicator on the display is green.
NOTE:
Near the bottom on the outside of the
columns, there are numbers to help identify
the height level.
–
If the support top is tilted, press and hold the opposite tilt
control until the top is no longer tilted. The tilt indicator on
the display should be in the center of the tilt indicator area,
and the tilt level indicator should be green.
ROTATE THE SUPPORT TOP 180°
WARNING:
Before you adjust the Allen Advance Table or use the flip or tilt features,
make sure that the brakes a re locked, the patient is secured against the prone
support set, the patient is fully prepared for the adjustment; the Allen
Advance Table is free of objects that could interfere with the adjustment,
and all loose or unsupported objects have been secured. Otherwise, patient
fall, injury, or equipment damage could occur.
1. Make sure that—
Allen® Advance Table User Manual (80028190)
Instructions for Use
33