Locking And Unlocking The Brakes; Manually Release The Brakes; Reset The Electronic Brakes After Being Manually Released - allen Advance Table Bedienungsanleitung

Advance Table is to be used with a patient who
has intravenous, cardiac, or other medical
equipment.
LOCKING AND UNLOCKING THE
BRAKES
Caution:
Do not press the Lock control while the Allen Advance Table is being
moved. Equipment damage could occur.
Lock—press and hold the Lock control until the locked
indicator on the display is green.
Unlock—press and hold the key control as you press
the unlock control until the unlocked indicator on the
display is yellow.
When the brakes are locked, the locked indicator on the
display is green; when the brakes are not locked, the
unlocked indicator is yellow.
During a loss of power, if the brakes are locked and it is
necessary to move the Allen Advance Table , use the
Emergency brake releases on both columns to manually unlock the brakes.

Manually Release the Brakes

Pull the emergency brake releases on both
columns.
NOTE:
Each column has a release. You must pull
both releases to unlock the brakes. The
handles do not have to be pulled at the same time.

Reset the Electronic Brakes after being Manually Released

After you use the emergency brake releases to unlock the brakes, you must
do these steps to lock or reset the brakes:
1. Make sure there is power to the Allen
Advance Table, and its On/Off switch is
on.
–
Press and hold the Key control
as you press the Unlock control.
You will hear the brakes move.
Allen® Advance Table User Manual (80028190)
Instructions for Use
21