Adjust The Height Of The Allen Advance Table; Put The Allen Advance Table In Atrendelenburg Position - allen Advance Table Bedienungsanleitung

Instructions for Use
ADJUST THE HEIGHT OF THE ALLEN ADVANCE
TABLE
WARNING:
Before you adjust the Allen Advance Table or use the tilt feature, make sure
that the brakes are locked, the patient is secured to the support top and is
fully prepared for the movement, and the Allen Advance Table is free of
objects that could interfere with the adjustment. Otherwise, patient fall,
injury, or equipment damage could occur.
1. Make sure that—
The brakes are locked (the locked indicator on the
Allen Advance Table display is green).
The patient is secured to the support top and is fully
prepared for the adjustment.
NOTE:
We recommend that you use the two large safety straps to secure the
patient to the support top.
The Allen Advance Table is free of objects that could interfere
with adjustment.
WARNING:
Observe lines closely during articulations. Always use good line
management techniques. Otherwise, patient fall, injury, or equipment
damage could occur.
–
Press and hold the applicable raise or
lower control until the Allen Advance
Table is at the correct height.
NOTE:
Near the bottom on the outside of the
columns, there are numbers to help identify
the height level.
PUT THE ALLEN ADVANCE TABLE IN A
TRENDELENBURG POSITION
WARNING:
Before you adjust the Allen Advance Table or use the tilt feature, make sure
that the brakes are locked, the patient is secured to the support top and fully
prepared for the adjustment, and the Table is free of objects that could
30 Allen® Advance Table User Manual (80028190)