Fuses; Accessories - allen Advance Table Bedienungsanleitung

Accessories

FUSES

Removal
1. Make sure the brakes are locked (the locked indicator
on the Allen Advance Table display is green).
WARNING:
Failure to remove power from the Allen Advance Table
could cause patient fall, injury, or equipment damage.
–
Turn the Allen Advance
Table off, and unplug the
power cord from the facility's
power source and from the
Allen Advance Table.
–
Pull the fuse holder from the
plug housing.
NOTE:
You may need to use a small
screwdriver or a pen to pry the holder
from the housing.
–
Remove the fuses from the
holder.
Replacement
1. Install the new fuses in the holder.
–
Fully insert the holder into the plug housing.
–
Plug the power cord into the Allen Advance Table outlet and
into an applicable power outlet, and then turn the Allen
Advance Table on.
–
Make sure all Allen Advance Table functions operate
correctly.
ACCESSORIES
For installation and use instructions, refer to the manufacturer's
documentation included with the accessory.
WARNING:
Weight ratings may differ for some accessories used with the Allen
Advance Table. Make sure you do not exceed the weight rating that is
48 Allen® Advance Table User Manual (80028190)