Level The Allen Advance Table And The Support Top - allen Advance Table Bedienungsanleitung

Instructions for Use
objects that could interfere with the adjustment. Otherwise, patient fall,
injury, or equipment damage could occur.
1. Make sure that—
The brakes are locked (the locked indicator on the
Allen Advance Table display is green).
The patient is secured to the support top and is fully prepared for
the adjustment.
NOTE:
We recommend that you use the two large safety straps to secure the
patient to the support top.
The Allen Advance Table is free of objects that could interfere
with adjustment.
WARNING:
Observe lines closely during articulations. Always use good line
management techniques. Otherwise, patient fall, injury, or equipment
damage could occur.
–
Press and hold the applicable tilt
control until the support top is at the
correct angle. When you release the
control, the support top will lock
at that angle.
The tilt indicator on the display
will show how far the support
top is tilted to the left or right.
–
To return the support top to the flat position, press and hold
the opposite tilt control until the top is no longer tilted. The
tilt indicator on the display will be in the center of the tilt
indicator area and the tilt level indicator will be green.
LEVEL THE ALLEN ADVANCE TABLE AND THE
SUPPORT TOP
To determine if the Allen Advance Table is level, look at the display:
The tilt level indicator will be
green.
The tilt indicator will be in the
center of the tilt indicator area.
WARNING:
Before you adjust the Allen Advance Table or use the tilt feature, make sure
that the brakes are locked, the patient is secured to the support top and is
fully prepared for the movement, and the Allen Advance Table is free of
32 Allen® Advance Table User Manual (80028190)