Shut Down The Allen Advance Table - allen Advance Table Bedienungsanleitung

The traction rope stays in the indented section of the cervical
traction bar.
You do not press the Cervical Traction Release button while
traction weight is being applied.
NOTE:
The cervical traction bar is an optional accessory that is supplied to
help with the angle of pull for the cervical traction. If used, install the
bar a t the applicable location on the H-bracket.
–
After use of the traction weight, remove the weight and the
rope from the assembly.
–
Press the Cervical Traction Release button, and then push
the assembly into the column so that it is in the locked -in
position.

SHUT DOWN THE ALLEN ADVANCE TABLE

1. Level the Allen Advance Table and the support top (see "LEVEL THE
ALLEN ADVANCE TABLE AND THE SUPPORT TOP" on
page 32).
–
Press and hold the lower control until the Allen
Advance Table is in its lowest position.
–
Hang the pendant and its cord
on their holders.
–
Turn the Allen Advance Table
off. This removes all power
from the Allen Advance Table.
–
Unplug the power cord from the
facility power outlet, and store
the power cord on the Allen
Advance Table.
NOTE:
We recommend that you keep the Allen Advance Table plugged in
Allen® Advance Table User Manual (80028190)
Instructions for Use
41