Remove probe cover box carrier from the cradle by rotating
the probe cover box carrier forward. See 14.5 Removing and
installing probe cover box carrier.
Wipe the cradle and probe cover carrier with a damp cloth or
cleaning wipe with cleaning solution from the Approved Cleaning
Solutions Table.
Allow at least 5 minutes drying time before taking temperature.
Make sure probe, body and cradle are clean and dry prior to use.
14.3 Cleaning the tether (sold separately)
To clean the tether, ensure that the wipe is moist, not saturated.
Wipe the tether with a damp cloth or cleaning wipe with cleaning
solution from the Approved Cleaning Solutions Table.
2
1
MINUTES
25