Press and release measure
The thermometer will beep once, running dashes will appear on
the display then the green ExacTemp light will fl ash, indicating
consistent probe position.
Note: Always press the measure
measurement.
Temperature measurement.
steady green ExacTemp light will signal the end of the
measuring process.
The temperature will show on the display.
If the thermometer is unstable or patient is moving during the
measuring process, the device will beep, the green ExacTemp
light will fl ash and POS (Position Error) will fl ash on the display.
Be sure the device is stable and restrict patient movement
for the next measurement. Change the probe cover to reset.
* See 12. Errors and notifi cations
button.
button before taking a
A long beep and
12