Braun Welch Allyn Thermoscan PRO 6000 Gebrauchsanweisung Seite 25

Solution or
Family
brand
Chlorine 10 % Chlorine
and chlorine bleach solution
compounds
Quaternary CaviWipes™
ammonium
Clinell
®
compounds
Universal Wipes
SaniCloth
Metrex
Hydrogen Virox
peroxide
Oxivir
Alcohol 70 % isopropyl
or ethyl alcohol
Additional cleaning agents may be periodically evaluated for compatibility. If your cleaning agent is
not listed, contact Welch Allyn to determine if additional cleaning agents are approved for use.
As needed, clean the thermometer body and cradle following the below directions.
Note: If any cleaning agent, other than isopropyl or ethyl alcohol, comes into contact with
the probe, probe lens window or contacts immediately wipe dry. Then clean the probe, probe
lens window and contacts with isopropyl or ethyl alcohol.

For additional protection, we recommend placing a new probe
cover on the thermometer probe to protect this area when
cleaning the body of the thermometer.

Use a damp cloth or cleaning wipe with cleaning solution from
the Approved Cleaning Solutions Table. To clean the body, ensure
that the wipe is moist, not saturated. Wipe the body with the
display facing up.
Approved cleaning solutions
Probe
lens Probe
window
No No
No No
No No
Yes Yes
Thermometer
Contacts
body & cradle
No Yes
No Yes
No Yes
Yes Yes
Tether
Yes
Yes
Yes
Yes
24