Drive-Away Lock - Ottobock Skippi Gebrauchsanweisung

Operation
Display symbol
Tab. 2 Display of electric seat functions on the control panel
142 | Ottobock
Downloaded from www.Manualslib.com
Information
Electric back angle adjust-
ment
Electric seat tilt
Electric seat height adjust-
ment
Coupled electric seat
adjustment (backrest and
seat tilt)
Creep speed
manuals search engine

6.3.6 Drive-away lock

INFORMATION
The drive-away lock can be activated in the manner de-
scribed below if the "Drive-away lock" parameter is set to
"On". The drive-away lock parameter is set to "Off" by de-
fault. The factory setting may also have been set to "On"
by the specialist dealer or at the factory according to the
order. Please ask your specialist dealer about the setting
selected for your wheelchair.
The power wheelchair control unit features an electronic
drive-away lock. This function is activated/deactivated with
the control panel.
Activation via control panel
1. While the control unit is turned on, press and hold the
mode button for at least 5 seconds.
2. A short beep confirms that the drive-away lock was acti-
vated (if keypress beeps are activated, then the drive-
away lock is only active after the second beep).
3. The control unit is turned off automatically.
4. Activation of the drive-away lock is indicated by the key
symbol on the display.
Skippi