Ottobock Skippi Gebrauchsanweisung Seite 152

Accessories
Red is flashing
Green is flashing
Red/Orange/Green
flashing alternately
Tab. 6 "Battery Capacity" indicator
Mode button (item 3)
Switch between speed level 1 and 2 by pressing the button
briefly.
Push and hold the button (at least 2 seconds) to switch the
control unit to the electric seat functions.
Mode LED (item 4)
The Mode LED indicates the speed level status and system
faults using 3 colour LEDs and various flash codes:
LED
Green is lit
Orange is lit
Red – flashing
152 | Ottobock
Downloaded from www.Manualslib.com
Battery deep discharge -
charge immediately
Battery over-voltage (e.g. after
driving downhill) - Continue
driving slowly
Charging process / drive
away lock
Status
Speed level 1
Speed level 2
Fault (see chapter 8.2.2)
manuals search engine
Off
Tab.7 Display of the speed levels / system faults
Display of the selected electric seat function (item 5)
The electric seat functions are accessed by pressing and
holding the "M" button (approx. 2 seconds).
The currently selected seat function is indicated on the con-
trol panel display (see chapter 6.3.5) and by the following
LEDs on the attendant control:
LED indicator
LED display switched to
seat functions
Information
Electric back angle adjust-
ment
Electric seat tilt
Electric seat height adjust-
ment
Skippi