Fault Indication: Control Panel - Ottobock Skippi Gebrauchsanweisung

Malfunctions / troubleshooting

8.2.1 Fault indication: Control panel

Display symbol
164 | Ottobock
Downloaded from www.Manualslib.com
Warning/Fault
Controller tempera-
ture warning
Overheating due to excessive load
Motor temperature
warning
Joystick is not in the home position
Joystick warning
when the unit is turned on
Hand control device
Defective joystick
fault
Controller fault Defective controller
Faulty connection between the hand
Communication error
control device and controller;
(alternating flashing
Defective cabling, software or hard-
signal)
ware
Battery under voltage Battery deep discharge
manuals search engine
Cause
Cool down phase
Move the joystick to the home
position before turning the unit
on
Contact specialist dealer
Contact specialist dealer
Check cabling /
plug connections;
Contact specialist dealer
Charge as soon as possible
Possible corrective action
Skippi