Safety Functions - Ottobock Skippi Gebrauchsanweisung

„ Switch the controls off.
„ Ensure sufficient ventilation in enclosed spaces.
„ Smoking and open flames are not permitted. Sparks
must be avoided.
NOTICE
Unauthorised battery replacement. Batteries may only be
replaced by a specialist dealer. The characteristic curve of
the battery charger established at the factory corresponds
to the battery included in the scope of delivery and may not
be altered independently. Setting the characteristic curve
incorrectly can result in permanent damage to the battery.
NOTICE
Risk of damage to electronics due to water penetration.
Never use a water jet or high-pressure cleaning apparatus
to clean the power wheelchair. Water must not come into
direct contact with the electronics, motor or battery under
any circumstances.
INFORMATION
The functionality and operating safety of the power wheel-
chair must be verified by an authorised specialist dealer at
least once per year.
Skippi
Downloaded from www.Manualslib.com manuals search engine
INFORMATION
Piston rods do not require lubrication. They are mainte-
nance-free.
INFORMATION
Defective batteries must be disposed of properly in ac-
cordance with country-specific regulations. They can be
returned to the dealer when buying a new one.
2.7

Safety functions

INFORMATION
In dangerous situations, the power wheelchair can be
turned off at any time using the on/off button. When the
button is pressed, the power wheelchair brakes immedi-
ately and the electrical functions cease.
Malfunctions such as an insufficient supply of power to the
wheel lock are recognised by the software, triggering an
emergency stop or reducing the speed of the power wheel-
chair. A warning signal will also sound.
Safety
Ottobock 111
|