Electric Seat Functions; Safety Instructions - Ottobock Skippi Gebrauchsanweisung

Tab. 8 Display of electric seat functions
Moving the joystick right switches between the different seat
functions. The selected function can be extended or retract-
ed by moving the joystick forward or backward (also see
chapter 6.3.5).
The corresponding LED flashes if an error occurs. See
chapter 8.2.2 for the meaning of the fault notifications.
Joystick (item 6)
The joystick is used for driving. The further it is moved away
from the centre position, the faster the power wheelchair will
drive in this direction.
If the seat functions are accessed with the Mode button,
then the joystick is used to select and activate the seat func-
tions (see item 5 and chapter 6.3.5).
Skippi
Downloaded from www.Manualslib.com
Coupled electric seat
adjustment (backrest and
seat tilt)
manuals search engine
7.2

Electric seat functions

7.2.1 Safety Instructions

The power wheelchair can be equipped with a range of op-
tional electric seat functions.
WARNING
Risk of falling while driving with electric seat options.
„ Drive in street traffic only with the seat tilt and seat height
adjustments lowered and with a vertical backrest.
„ Drive with the seat raised or with the seat tilt/back angle
adjustment activated only for short distances at home.
Always use the speed level 1 for this. Note that the field
of vision is limited when driving.
„ Slightly tilt the seat to the rear when driving forwards
down inclines or over obstacles (e.g. curbs) and reduce
the speed.
„ Use the seat height adjustment and the seat tilt only on
firm, level ground.
„ Note that the climbing ability of power wheelchairs with
electric seat height adjustment and seat tilt is reduced.
Driving on inclines and slopes is permitted under ISO
7176-1 and 7176-2 with lowered seat height adjustment
and lowered seat tilt up to max. 6° (10%).
Accessories
Ottobock 153
|