Getting In And Out; From The Side; Footrest Holder: Adjusting The Longitudinal Position - Ottobock Skippi Gebrauchsanweisung

Fig. 25

Footrest holder: Adjusting the longitudinal position

Fig. 26 Footrest holder: Adjusting the lateral position
Skippi
Downloaded from www.Manualslib.com manuals search engine
6.2

Getting In and Out

CAUTION
Risk of injury if the power wheelchair starts rolling. The
power wheelchair controls must be switched off while get-
ting in and out. This will engage the motor brake automati-
cally.
CAUTION
Risk of breakage due to overloading. The user may not
support their full weight on the footrests or armrests while
getting in and out.
The modular design of the power wheelchair and the ease
with which you can remove the side panels and footrests
make it easy to get into and out of the wheelchair from the
side or from the front.
Users can get into and out of the wheelchair using the meth-
od best suited to each individual.

6.2.1 From the side

To get in from the side, the right or left side panel corre-
sponding to the entry side must be removed. If possible, al-
ways get in on the side opposite the control panel.
Operation
Ottobock 133
|