Releasing And Engaging The Wheel Lock - Ottobock Skippi Gebrauchsanweisung

Display symbol
Tab. 3 Display of the drive-away lock on the control panel
Deactivation via control panel
1. Press the On/Off button to turn the control unit on.
2. Push the joystick as far forward as possible until a beep
sounds.
3. Push the joystick as far back as possible until a beep
sounds.
4. Release the joystick. Another beep confirms deactivation
of the drive-away lock.
5. The speed level and battery indicator are displayed.
The drive-away lock is deactivated and driving is enabled.
INFORMATION
The drive-away lock remains activated if the joystick is not
moved correctly. In order to deactivate the drive-away lock,
the control unit must be switched off again. The power
wheelchair can be switched on again and the drive-away
lock can be deactivated.
Skippi
Downloaded from www.Manualslib.com
Information
Drive-away lock
manuals search engine
6.4

Releasing and engaging the wheel lock

WARNING
Danger to life due to wheel lock malfunction. Incorrect
wheel lock settings can lead to a loss of brake functionality
and therefore to serious bodily injuries and even death.
Repairs and adjustments to the wheel lock may only be
carried out by authorised service personnel.
WARNING
Risk of accidents and injury due to lack of brake func-
tionality. No brake functionality is available when the wheel
lock is deactivated (push mode).
„ No brake functionality is available when the brake is
unlocked (push mode).
„ When moving the power wheelchair on an incline, the per-
son pushing must provide the appropriate brake force.
„ The brake function may only be released in the pre-
sence of an attendant.
„ Should the user be unable to release the brake himself,
the brake can be released by the attendant.
Operation
Ottobock 143
|