Ottobock Skippi Gebrauchsanweisung Seite 168

Maintenance and Care
Components
Mounting screws tightened
Armrest and
Armrest and operator control secured
side panel
Check armrest for damage
Wheels must rotate freely and without axial run out
Central nut on the drive shaft tightened
Drive wheels
Check if wheel mounts are seated securely
Directional stability of the entire wheelchair
Check air pressure (see tyre sidewall)
Tyres Sufficient tread depth, at least 1 mm
Check for damage
Batteries Check battery capacity
No fault indications on the control unit
Electronics Battery charger does not show any error messages via the LEDs
Check plug connections
Activate wheel lock lever while control unit is switched on
Wheel lock
Check that the brake function is active when the wheel lock is
engaged
168 | Ottobock
Downloaded from www.Manualslib.com
Activity
manuals search engine
Daily Weekly
Prior to every use
X
X
Prior to every use
X
X
Monthly
X
X
X
X
X
X
X
X
X
X
Skippi