Electric Seat Tilt - Ottobock Skippi Gebrauchsanweisung

Accessories
The power wheelchair can be equipped with an optional
seat height adjustment feature. The seat height adjustment
function increases the height of the seat above the drive unit
by up to 20 cm.
The driving function at home remains available even when
the seat is raised. The speed is reduced (creep speed) as
soon as the seat leaves the lowest position, because the
power wheelchair is less resistant to tipping. This is indica-
ted on the control panel.
The function is activated with the joystick in Additional func-
tions / Seat functions mode (see chapter 6.3.5 and 7.1.1).
Fig. 37 Seat with activated seat height adjustment function
156 | Ottobock
Downloaded from www.Manualslib.com manuals search engine
Fig. 38 Display creep speed

7.2.3 Electric seat tilt

WARNING
Risk of falling due to incorrect seat tilt handling
„ Drive in street traffic only with the seat tilt lowered.
„ When driving with the seat tilt activated, fasten the
belts (lap belt, four-point belt) and do not lean out be-
yond the seat surface with the seat raised.
INFORMATION
Please also observe the safety instructions in the section
„Electric Seat Functions" > „Safety Instructions for Use".
Skippi