Ottobock Skippi Gebrauchsanweisung Seite 171

Therefore, sufficient clearance should always be main-
tained from sources of heat, and the wheelchair should be
moved frequently or placed on blocks for storage.
Proceed as follows to replace the tyre/inner tube on a drive
wheel:
1. Secure the wheelchair so it cannot tip over by placing a
suitable support under the drive unit.
2. To remove the wheel, use a size 8 Allen key to remove
the 4 Allen head screws in the centre of the wheel (Fig.
45) and remove the wheel.
3. To replace the tyre/inner tube of a drive wheel, remove
the screws on the inside of the rim with a size 8 Allen key
and pull the two parts of the rim apart.
4. The defective inner tube is now freely accessible and
can be replaced.
Skippi
Downloaded from www.Manualslib.com manuals search engine
Fig. 45 Removing the drive wheel
Proceed as follows to change a front wheel tyre:
1. To remove the caster wheel, loosen the axle screw with a
size 6 Allen key (see Figure 49, item 1) and pull out the
axle.
2. The defective wheel is now freely accessible and can be
replaced.
Maintenance and Care
Ottobock 171
|