Operating Environment; Space Requirements; Setup; Unpacking - Knauer Azura DAD 2.1L Benutzerhandbuch

17
Earth quake regions
Prerequisite
Tool
KNAUER
Installation

Lateral distance to other devices:

At least 5 cm if another device is set up on one side

At least 10 cm if further devices are set up on both sides

Leave the power plug on the rear of the device accessible
to be able to disconnect the device from the mains.

Avoid sources of high frequencies near the device. High-fre-
quency sources may compromise measuring values.

Operating Environment

If the device is set up in a region where earth quakes are com-
mon, secure the device at the two fixing points
points are situated on both sides of the device.
Fig. 5 Fixing points on the device

Space Requirements


Side clearance to other devices:

At least 5 cm, if there is another device on one side.

At least 10 cm, if there are devices set up on both sides.

At least 15 cm on the rear panel for the fan.

Setup

Prior to setting up the device, find a suitable place according to
the requirements and remove the packaging. The requirements
and a description can be found in the following section.

Unpacking

Check packaging for damage caused during transportation.
Utility knife
CAUTION! 
Damage to the device by lifting on protruding
housing parts! 
Lift the device on the side of the housing only.
DAD 6.1L, DAD 2.1L, MWD 2.1L User Manual V6700, Version 1.0
. The fixing
1
1