Installation; Contact Data; Transport; Installation Site And Space Requirements - Knauer Azura DAD 2.1L Benutzerhandbuch

Installation

Technical Support
Device data
Lifiting
KNAUER
16 Installation
This chapter describes all preparatory steps prior to the start-up.
If you encounter difficulties during installation, contact the
Technical Support.

Contact Data

Phone
Fax
E-mail

Transport

Carefully prepare the device for transport or storage. If you want
to return your device to KNAUER for repairs, enclose the Service
Request Form which can be downloaded from our website.
For a secure transport, note the weight and dimensions of the
device (see Technical Data).
CAUTION! 
Damage to the device by lifting on protruding
housing parts! 
Lift the device on the side of the housing only.
Clasp the device at its side panels and lift it out of the packag-
ing. Do not hold onto front cover or leak tray.
Only if the requirements for ambient conditions of the operating
environment are met, can the intended use be ensured. You will
find the ambient conditions under Technical Data.
CAUTION! 
Defect of the device due to overheating possible! 
Protect the device against exposure to direct sun-
light. 
Keep clear at least 15 cm at the rear and 5–10 cm
at each side for air circulation.

Installation Site and Space Requirements


Position the device on a level and even surface.

Sunlight: Protect the device against direct exposure to sun-
light.

AC system: Set up the device at a location not exposed to air
drafts.

Vibration: Do not set up the device in the vicinity of other
machines that cause floor vibrations.
DAD 6.1L, DAD 2.1L, MWD 2.1L User Manual V6700, Version 1.0
+49 30 809727-111
+49 30 8015010
support@knauer.net