Declaration Of Conformity - Knauer Azura DAD 2.1L Benutzerhandbuch

Declaration of Conformity

Manufacturer Wissenschaftliche Gerätebau
Dr. Ing. Herbert Knauer GmbH
Hegauer Weg 38
14163 Berlin, Germany
Product: Detector DAD 6.1L, DAD 2.1L,
MWD 2.1L
Order number EDC11
Designation 1
DAD 6.1L
Designation 2
Diode array detector DAD 6.1L
The product complies with the following requirements and
product specifications:
Europe
ƒ
DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 17 May 2006 on machinery, and
amending Directive 95/16/EC (recast)
ƒ
IEC 60799 (June 1998) Electrical accessories - Cord sets and
interconnection cord sets
ƒ
IEC 61010-1 (2010 + Corrigendum: 2011) Safety require-
ments for electrical equipment for measurement, control
and laboratory use
ƒ IEC 61010-2-081 (2001 + A1:2003) Safety requirements
for electrical equipment for measurement, control and
laboratory use - Part 2-081: Particular requirements for
automatic and semi-automatic laboratory equipment for
analysis and other purposes
IEC 61010-2-010 (2003) Safety requirements for electrical
ƒ
equipment for measurement, control, and laboratory use -
Part 2-010: Particular requirements for laboratory equip-
ment for the heating of materials
ƒ Low voltage directive (2006/95/EC)
ƒ
IEC 61000-3-2 (2005 + A1:2008 + A2:2009) Electromag-
netic compatibility (EMC) Part 3-2
EMC standard (2004/108/EC)
ƒ
ƒ
IEC 61326-1 (2012) Electrical equipment for measurement,
control and laboratory use – EMC requirements – Part 1:
General requirements
ƒ
Directives for an environmentally sound use of electrical and
electronic equipment
EDC01
DAD 2.1L
Diode array detector DAD 2.1L
ƒ RoHS directives 2002/95/EC (2003) and 2011/65/EU on
the restriction of the use of certain hazardous substances
in electrical and electronic equipment
WEEE directive 2002/96/EC (2003) and 2012/19/EU on
ƒ
waste electrical and electronic equipment
Canada
ƒ
UL 61010 - 1: 2012 (2012-05-11) Safety requirements for
electrical equipment for measurement, control, and labora-
tory use - Part 1: General requirements
USA
ƒ
CAN/CSA - C22.2 NO. 61010-1-12 (2012) - Safety require-
ments for electrical equipment for measurement, control,
and laboratory use - Part 1: General requirements
The product was tested with a typical configuration.
Berlin, 2014-08-15
Alexandra Knauer (CEO and owner)
The mark of conformity has been applied to the rear panel of
the device.
EDB01
MWD 2.1L
Variable multi wavelength
UV/VIS detector MWD 2.1L