Removing A Leak; Fig. 39 Lamp Cover - Knauer Azura DAD 2.1L Benutzerhandbuch

56
Procedure
Next steps Bring the device into operation.

Removing a Leak

Prerequisite If the leak tray is filled with liquid, the leak has to be removed.
Auxiliary material Cloth for drying the leak sensor
Procedure
Next steps Bring the device into operation.
KNAUER
Maintenance and Care
Process
5. Attach the lamp
cover and fix with
the screws and
8
.
9
Process
1. Remove the leak
2. Dry the leak tray.
3. Acknowledge the error message via Mobile Control, Con-
trol Unit, the software of the standby switch (without soft-
ware control).
DAD 6.1L, DAD 2.1L, MWD 2.1L User Manual V6700, Version 1.0
Figure
Fig. 39 Lamp cover
8
9