Re-Setting The Device - Knauer Azura DAD 2.1L Benutzerhandbuch

34 Operation
Color
flashes green
blue

Re-Setting the Device

The DAD 6.1L can be reset to default settings using the Control
Unit.
Parameter
Network
Lamps
Time constant
Channels
Reference correction
Analog out
Flow cell
Event check
Date/Time
Wake-up
Leak sensor
KNAUER DAD 6.1L, DAD 2.1L, MWD 2.1L User Manual V6700, Version 1.0
Status Operation

The device not
ready for opera-
tion.

The device is in
standby
Setting
LAN DHCP, port 10001
D2 ON, Halogen OFF
2 s
Channel 1: WL = 254 nm, BW = 8 nm
Reference channel enabled for channel
1, WL = 360 nm, BW = 30 nm
Offset 1 = 0.00 mV, Scale 1 = 1 AU/V
Test cell
All events deactivated (o)
Current date/time
Current date/time
ON, Sensitivity = low
Wait until the
device is ready
for operation.
Press the
standby but-
ton to end the
standby.