Knauer Azura DAD 2.1L Benutzerhandbuch Seite 12

Where is use of the
device prohibited?
Taking the device out of
operation
Opening the device
KNAUER
13 Safety for Users
More safety-relevant information is listed in alphabetical order in
the following table:
Topic
Flammability
Solvent tray
Solvent lines
Leaks
Power cable
Self-ignition
point
Power strip
Power supply
Toxicity
Never use the system in potentially explosive atmospheres with-
out appropriate protective equipment. For further information,
contact the Technical Support of KNAUER.
At any time, take the device completely out of operation by
either switching off the power switch or by pulling the power
plug.
The device may be opened by the KNAUER Technical Support or
any company authorized by KNAUER only.
DAD 6.1L, DAD 2.1L, MWD 2.1L User Manual V6700, Version 1.0
Explanations
Organic solvents are highly flammable.
Since capillaries can detach from their
screw fittings and allow solvent to escape,
it is prohibited to have any open flames
near the analytical system.
Risk of electrical shock or short circuit if
liquids get into the device's interior. For
this reason, place all bottles in a solvent
tray.
Install capillaries and tubing in such a way
that liquids cannot get into the interior in
case of a leak.
Regularly check if any system compo-
nents are leaking.
Defective power cables are not to be used
to connect the device and the power sup-
ply system.
Only use eluents that have a self-ignition
point higher than 150 °C under normal
ambient conditions.
If several devices are connected to one
power strip, always consider the maxi-
mum power consumption of each device.
Only connect devices to voltage sources,
whose voltage equals the device's volt-
age.
Organic eluents are toxic above a certain
concentration. Ensure that work areas are
always well-ventilated! Wear protective
gloves and safety glasses when working
on the device!