3M Attest Auto-reader 490 Benutzerhandbuch Seite 12

c) History page
Status
ID Well# Start Time
History
1 #3 2017-09-16 08:30:38
2 #9 2017-09-16 07:19:47
3 #2 2017-09-16 07:08:18
4 #1 2017-09-16 07:07:53
5 #10 2017-09-16 07:05:11
6 #9 2017-09-16 06:47:08
7 #10 2017-09-16 06:40:54
8 #2 2017-09-16 06:39:49
9 #1 2017-09-16 06:39:05
10 #10 2017-09-16 07:32:00
11 #9 2017-09-16 07:23:37
12 #10 2017-09-16 07:20:24
The 3M™ Attest™ Auto‑reader 490 stores results for the last 100 incubated BIs on
embedded software. The 3M™ Attest™ Auto‑reader 490 Web App History page provides
a summary of these last 100 results.
d) Configuration page
This page allows the configuration of the 3M™ Attest™ Auto‑reader 490's network and
language settings from the 3M™ Attest™ Auto‑reader 490 Web App.
Documenting BI Results using the 3M™ Attest™ Auto‑reader 490
Web App
Status
History
ATTEST
1 2 3 4
+ – 24
1. Open the Results Detail page
After inserting a new 3M™ Attest™ Super Rapid Readout BI in the 3M™ Attest™
Auto‑reader 490, it is a best practice to open the 3M™ Attest™ Auto‑reader 490 Web
App Results Detail page for that BI by clicking on the appropriate well number from the
Status page.
2. Enter the specific information for that BI (e.g. BI Type, BI Lot #, sterilizer #, load #,
technician name, etc.) in the provided editable fields. Use the Notes section to capture
information not prescribed in the provided row titles, for example, you may wish to use
this field to record load items.
3M™ Attest™ Auto-reader
Result
...
–
–
+
+
–
+
–
+
–
–
+
3M™ Attest™ Auto-reader
ATTEST
5 6 7 8 9 10
–
2017-09-16 08:31
SN
100157
Copyright © 2017 3M, Inc.
Status
History
Print
Result
Start Time
Well#
Serial Number
BI Type
Control?
BI Lot#
Sterilizer#
Load#
Implant?
Technician
Sterilizer Model
Cycle Type/Cycle
Parameters
Chemical
Integrator?/Indicator?
Notes
3. The entered information is saved automatically to temporary web browser storage on
the user's PC every 60 seconds, or by leaving the Results Details page.
4. Print/File. Once the BI result is available, print or file the Results Detail page to create
a record. The page may be physically printed and/or saved as an electronic file.
Important! Data is only stored for the last 100 incubated BIs.
Embedded software in the 3M™ Attest™ Auto‑reader 490 saves the data from the
auto‑populated (i.e. green highlighted) fields. The application relies on the temporary
storage in the user's web browser to save the data in the user‑populated fields. In both
cases, data is only stored for the last 100 records i.e., the 101st incubated BI will erase
the information saved for the 1st incubated BI. To retain the Results Detail information for
future reference it is best practice to print the page as soon as the BI result is available.
+
3M™ Attest™ Auto-reader Results Detail
−
2017-09-16 07:04:41
#2
100157
1492V
No
2019-11NE
2
3
Yes
sdf
9600
270F, 4 min pre-vac
Accept
Copyright © 2017 3M, Inc.
11