Storage And Recycling - HUPFER SPTW-2/EBF Betriebsanleitung

Chapter 4
Page 20
4.3

Storage and Recycling

Temporary storage must take place in a dry and frost-free environment. The food transport trolley must be
kept covered with a suitable covering material to be protected against dust ingress.
The appliance kept in the storage location must be checked for damages and corrosion every 6 months.
NOTE
Before the appliance is taken back into operation it must be clean and dry.
If the food transport trolley is recycled, all operating and auxiliary materials must be disposed in an environ-
mentally compatible manner. The recyclable materials must be properly separated and disposed in an envi-
ronmentally compatible manner according to the local Waste Disposal Regulations. In any case, the local
bodies responsible for disposal are to be involved for this purpose. Separate the reusable materials of the
appliance (casters and plastic parts) before disposing or send the appliance to a recycling centre. Dispose
the electronics at corresponding collection centres.
We offer our customers to dispose their waste appliances. Please contact us or one of our distribution part-
ners.
Packaging and packing material can be sent to the recycling centre by indicating the waste disposal contract
number. If you do not have the valid waste disposal contract number, you can ask for it at
vice.
Food transport trolley
SPTW-2/EBF | SPTW-3/EBF | SPTW-2/EBF-S | SPTW-3/EBF-S | SPTW-2/EBF-K | SPTW-3/EBF-K
Transport, Putting into Operation and Decommissioning
Condensed water formation
Ensure that there is sufficient ventilation and no large temperature fluctuations
in the storage location to avoid condensed water formation.
Storage and Recycling
®
HUPFER - Ser-
4330025_A1