Safety Instructions For Troubleshooting; Notes On Specific Hazards - HUPFER SPTW-2/EBF Betriebsanleitung

Safety Instructions

Safety Instructions for Troubleshooting

2.6 Safety Instructions for Troubleshooting
The following points must be observed when carrying out any troubleshooting operations:
§
The local applicable Accident Prevention Regulations must be observed.
§
Take the food transport trolley out of operation, switch it off, pull out the mains plug and secure it
against unauthorised reactivation before performing maintenance or troubleshooting operations.
When working on the electrical installation, the appliance must be switched off at the mains and se-
cured against reactivation. This work must only be carried out by a certified electrician.
§
Observe the valid product safety regulations when handling oils, greases and other chemical sub-
stances.
§
Carry out all the checks and inspections of the appliance on a regular basis. Remedy immediately de-
ficiencies, such as loose screw connections, melted or damaged leads.
§
Only authorised specialists may perform all repair work.
§
Defective components should only be replaced with original parts.
2.7

Notes on Specific Hazards

Electrical energy
§
All work on the electrical installations should only be carried out by a certified electrician or by author-
ised specialists under supervision and monitoring of a certified electrician according to the applicable
electro-technical regulations.
§
The appliances on which inspection, maintenance and troubleshooting work is performed must be
disconnected from the power supply and secured against reactivation when the voltage is not re-
quired for this kind of work. This must only be carried out by a certified electrician.
4330025_A1 SPTW-2/EBF | SPTW-3/EBF | SPTW-2/EBF-S | SPTW-3/EBF-S | SPTW-2/EBF-K | SPTW-3/EBF-K
Chapter 2
Page 11
Food transport trolley