Description And Technical Data; Performance Description; Intended Use - HUPFER SPTW-2/EBF Betriebsanleitung

Chapter 3
Page 12
3

Description and Technical Data

3.1

Performance Description

The food transport trolleys hold up prepared meals and keep them warm. Food in gastronorm containers can
be either put into bain-marie wells or gastronorm containers, on grids or into baskets in heated cupboards.
When switched off and with the use of a cold storage plate, the cupboard compartments can also be used for
cold meals and cold side dishes, e.g. salads, bread, cold cuts and desserts. Bain-marie wells and heated
cupboards are thermally insulated from each other.
Mobile food transport trolleys are mainly used to store, transport for short distances and distribute hot meals.
Food transport trolleys can be used everywhere, where the use of tray systems is not efficient and the free
choice of a portion size is a particularly important decision criterion.
The number of persons depends on the number of menu components.
Food transport trolleys are available in different equipment variations. All models are equipped with bain-
marie wells and heated cupboards.
§
The food transport trolley SPTW-2/EBF-S and SPTW-3/EBF-S are closed with a two-part sliding lid
above the bain-marie wells.
§
The food transport trolley SPTW-2/EBF-K and SPTW-3/EBF-K are equipped with a hinged lid that can
be opened 1/3 to 2/3 to the left and to the right.
3.2

Intended Use

Food transport trolleys are intended for storing hot meals and for keeping meals warm. It is not possible to
heat up cold meals or to cook products which have been introduced in the warm state.
Food transport trolleys are only intended for the transport of meals in gastronorm containers or portioned
meals on grids or in baskets.
It is not permitted to heat dry the bain-marie wells of the appliances with foil heating.
Furthermore, objects with a firm base may be transported on appliances with a closed sliding (SPTW-2/EBF-
S and SPTW-3/EBS-S) that are protected with a non-slip pad against falling. These are for example crock-
ery, cutlery and napkins in suitable transport containers or on trays.
Do not exceed the maximum load limits per cover segment. Avoid point loads, otherwise this can result in
deformations in the metal sheet surface.
The food transport trolleys are only intended for the transport for short distances. When transporting for
longer distances, connect the appliance to a power supply, switch the heating on and reheat the meals at
regular intervals.
When cooling meals or the components it is necessary to comply with the respective legal directives on food
storage (duration and temperature).
The intended use means the predetermined procedures, compliance with the indicated specifications and
use of the delivered or additionally available original accessories.
Any other use of the appliance is considered as unintended use.
Food transport trolley
SPTW-2/EBF | SPTW-3/EBF | SPTW-2/EBF-S | SPTW-3/EBF-S | SPTW-2/EBF-K | SPTW-3/EBF-K
Description and Technical Data
Performance Description
4330025_A1