Siemens SINUMERIK 840D sl Inbetriebnahmehandbuch Seite 599

xmldial.xml
<DialogGui>
<!--
main menu
It is called by the system software. It starts the application.
The menu tag manages the soft key reactions. One input form can be assigned
to a menu tag.
-->
<menu name = "MAIN">
<OPEN_FORM name = "CURRENT_DISPLAY" />
<softkey POSITION="1">
<caption>R-%nPrameter</caption>
<navigation>MENU_R_PARAMETER</navigation> <!-- opens the menu R parameter
-->
</softkey>
</menu>
<form name = "CURRENT_DISPLAY">
<init>
<caption>Istwerte</caption>
<control name = "label1" xpos = "36" ypos = "56" width = "32"
fieldtype="readonly" refvar="nck/Channel/GeometricAxis/name[0]" />
<control name = "label2" xpos = "36" ypos = "76" width = "32"
fieldtype="readonly" refvar="nck/Channel/GeometricAxis/name[1]" />
<control name = "label3" xpos = "36" ypos = "96" width = "32"
fieldtype="readonly" refvar="nck/Channel/GeometricAxis/name[2]" />
<control name = "label4" xpos = "36" ypos = "116" width = "32"
fieldtype="readonly" refvar="nck/Channel/GeometricAxis/name[3]" />
<control name = "label5" xpos = "36" ypos = "136" width = "32"
fieldtype="readonly" refvar="nck/Channel/GeometricAxis/name[4]" />
<control name = "edit1" xpos = "80" ypos = "56" refvar="nck/Channel/
GeometricAxis/actProgPos[0]" hotlink="true" fieldtype="readonly"
format="%9.3f" time="super fast"/>
<control name = "edit2" xpos = "80" ypos = "76" refvar="nck/Channel/
GeometricAxis/actProgPos[1]" hotlink="true" fieldtype="readonly"
format="%9.3f" time="super fast"/>
<control name = "edit3" xpos = "80" ypos = "96" refvar="nck/Channel/
GeometricAxis/actProgPos[2]" hotlink="true" fieldtype="readonly"
format="%9.3f" time="super fast"/>
<control name = "edit4" xpos = "80" ypos = "116" refvar="nck/Channel/
GeometricAxis/actProgPos[3]" hotlink="true" fieldtype="readonly"
format="%9.3f" time="super fast"/>
<control name = "edit5" xpos = "80" ypos = "136" refvar="nck/Channel/
GeometricAxis/actProgPos[4]" hotlink="true" fieldtype="readonly"
format="%9.3f" time="super fast"/>
Easy XML
Programmierhandbuch, 12/2018, A5E40869575 AC
Anwenderdialoge erstellen
1.4 Struktur der Projektierungsdatei
15