Product Information; Mode Of Operation; Variants; Multilift I - RK Multilift I Mono Montageanleitung

6.1 Mode of operation

The Multilift II and Multilift II lifting columns are used to adjust the height of tables or other
adjustment tasks of a similar kind. A direct current motor serves as drive.

6.2 Variants

The lifting columns are available in two versions:
•
Multilift I: products with code no. QAB...
•
Multilift II: products with code no. TM...
Both variants are driven using different external controls. The hand switch for traversing the
lifting column is connected to the external controller.
A list of suitable controls for the respective Multilift variant can be found at point 7.5.

6.3 Multilift I

6.3.1 Variants
The lifting column Multilift I is available in the following variants:
•
Mono version: only suitable for single and parallel operation
•
Synchro version: only suitable for synchronous operation
Both variants are available in:
•
configuration A (without a milled recess in the outer profile)
•
configuration B (with a milled recess in the outer profile)

6. Product information

51