Declaration Of Incorporation - RK Multilift I Mono Montageanleitung

1.1 Declaration of incorporation

As set out in Machinery Directive 2006/42/EC, Annex II, 1.B for partly completed machinery
Manufacturer
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden, Germany
Description and identification of the partly completed machine.
Product/manufacture:
Type:
Serial number:
Project number:
Order:
Function:
The following basic requirements of Machinery Directive 2006/42/EC as set forth in Appendix I
are applied and fulfilled:
1.1.5.; 1.3.2.; 1.3.3.; 1.3.4.; 1.3.7.; 1.3.8.; 4.1.2.3.; 4.1.3.
Moreover, we declare that the special technical documents have been created according to
Appendix VII Part B.
The manufacturer declares explicitly that the partially completed machinery meets all the relevant
provisions of the following EC directives:
2011/65/EU
Sources of the harmonised standards according to article 7, paragraph 2:
EN ISO 12100
Sources of the applied other standards and specifications applied:
EN 60601-1
The person in the community that is authorised to compile the
relevant technical documents.
Michael Amon
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden, Germany
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
electro-motorised extracting and retracting of the inner profile for suitability
of a linear movement.
RoHS
Safety of machinery – General principles for design – Risk assessment and
risk reduction (ISO 12100:2010)
Medical electrical equipment – General requirements for safety
1. Declaration of incorporation
41