Regulation (Advanced) - Multiplex WINGSTABI Erweiterte Anleitung

Maneuverability / roll rate
If for instance the model reacts too strongly to control inputs, reduce the value to under
100. If you want the model to respond faster, set the value to over 100. Increments of
10 make sense here.

Regulation (advanced)

Figure 10: Advanced settings in gyro phase 3
Direct input
This refers to the control input which is passed on directly to the control surfaces without
regulation. A direct input that is too small leads to an indirect and slow control behavior.
A direct input that is too large can cause the model to roll back when the stick returns to
the center with active regulation with the I input.
Seite 16/39